Tip 1 - Position both cars close jointly so the jump leads will arrive at both batteries.
Tip 2 - Then attach the car battery booster cable in this order:
a) Connect positive red cable to the positive terminal on the dead battery.
b) Connect the other end of the positive red cable to positive terminal on the working car.
c) Connect negative black cable to negative terminal on the working car.
d) Connect the other end of the negative cable to the negative terminal on the dead battery.
Tip 3 - You are now prepared to create the working car's engine. Turn off all electrical equipment on the working car (heater, lights, radio, etc.) so that all the battery power is getting used to jump create the dead battery. Let the operational car run for a minute or so earlier than you try to found the dead one. Bracing the engine in the working car will create more current and help with jump the dead battery.
Tip 4 - Now try and start the lifeless battery train by turning the ignition. If it sounds like it is going to create but will not quite go, then rev the working car for a little longer before annoying the dead battery again.
Tip 5 - When the lifeless battery has in progress and is running, take away the jump leads.
Do this in overturn order:
a) Disconnect negative black cable from the fatal on dead battery
b) Disconnect negative black cable from the negative terminal on the working car
c) Disconnect positive red cable from the positive terminal on the working car
d) Disconnect positive red cable from the positive terminal on the dead battery